Adding a Back Pocket to Your Mud Puddle Splashers


Ready to add a back pocket to your Mud Puddle Splashers? Go print the pattern to get started: MPS Back Pocket. (Be sure not to select sizing options such as “Fit to Page”. However, you should check the box next to “Rotate and Center”.)

First, a little aside from the basic tutorial: When I’m sewing with a stripe or a plaid, I like to turn the fabric and cut the pockets on the bias for a little added interest. If you’d like to do that, first find the line on your sewing ruler that says 45. (My ruler is upside down in this picture so the “45″ is backwards, but you get the idea.) Place that line on one of the straight lines of your fabric so that your ruler is now turned at a 45 degree angle.

Line the edge of your pattern up along the edge of your ruler, or if you’re not cutting on the bias, just place the pattern on your fabric. (The bottom half of the pattern will be the outside of your pocket, in case you want to center a design on the pocket.)

Trace the pattern.

Cut out your pocket.

Fold the pocket piece over, matching up the points. Pin. Sew around the two sides and bottom, leaving a 1 1/2″ opening in one side for turning. Trim the fabric at the corners and at the point.

Turn the pocket through the opening. Push out all the corners and the point neatly. (A clean chopstick works well for pushing out corners.) Tuck the edges of the opening in. Press well.

Topstitch the top edge of your pocket, once at 5/8″, then once 1/8″ to 1/4″ below the first line of stitching.

Center the pocket on the Back Body/Leg piece. If you’re only going to do one pocket, it is traditionally placed on the right-hand side. Pin the pocket 4 1/4″ below the waist for sizes 2T-4T, 4 1/2″ below the waist for sizes 5 to 6/7, and 4 3/4″ for size 8. The pocket is going to look like it’s really low. It’s fine, I promise!

Topstitch the pocket in place 1/8″ from the edge on the sides and bottom. Sew a second line of stitching 1/8″ to 1/4″ inside the first.

Follow the Mud Puddle Splashers instructions to complete your shorts.

See! That was easy, right? (If you’ve landed here and don’t know what the Mud Puddle Splashers are, just click over to this post right here: Mud Puddle Splashers Free PDF.)

Print Friendly

9 Responses to Adding a Back Pocket to Your Mud Puddle Splashers

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>